7 key factors will improve production of sand making machine, and six development trends

1. Different raw materials

Different raw materials have different hardness, viscosity and humidity. So the output of the sand making machine will also different according to the different materials.

1) Viscosity of materialthe greater the material viscosity, the easier it is to adhere. Materials with high viscosity will adhere to the inner wall of sand chamber in sand making machine.if not cleaned in time, the working efficiency of sand making machine will be seriously affected and even the normal operation of sand making machine will be affected.therefore, it should be noted that the material viscosity should not be too large.

2) Powder content

The higher the powder content in material, the more it affects sand production, because these fine powder easy to adhere to affect the transport. Therefore, the material with more fine powder content should be screened in advance, and the fine powder should be screened out from the material as far as possible, so as not to affect the work of sand making machine.

3) Material humidity

When the material is crushed in sand making machine, materials with higher water content is easy to adhere to, which may cause blocked and cannot be delivered, resulting in the sand making machine output reduction.so when selecting materials, the humidity of materials should be strictly controlled. If its humidity is too high, we can reduce the moisture in materials by sun or air drying.

4) Material hardness

The harder the material, the harder it is to sand and the faster the equipment wears down. This shows that the material selection to choose moderate hardness.

2. Design of sand production line

The output is also related to the equipment in the whole production line. The configuration of a production line should consider all factors comprehensively. For example, if you want to produce 500 tons sand an hour, it cannot only require the output of sand making machine to reach 500t. Other equipment like jaw crusher, cone crusher, belt convey and so on should be matched to work together. Otherwise, that is unable to meet the production requirements.

3. Machine type

Each type of sand making machine produces at various manufacturers is a different size and specification. The capacity and power of different types of equipment is not the same.when purchasing equipment, we should have an understanding of their basic production or you may get a wrong product which not only affect the output, but may cost you higher.

4. Quality of machine

Sand making machine with high quality not only has advantages on comprehensive performances, but has advantages on energy saving and environmental protecting. It can easily achieve the expected output. Because this kinds of equipment was made by new wear resistant material and advanced production technology, which can nice meet the production needs.

5. Speed of impeller

In a vertical shaft impact crusher, there is a relation between the input size of material and the linear velocity of rotor.

Under the same working condition, if the particle size of raw material is larger, the linear speed of crusher rotor is low. Therefore, under the same condition of particle size, water content and feed amount of incoming material, the rotor speed (linear speed) of sand making machine can be appropriately increased. It is thus no surprise to help raising production.

6. Standard operation and periodic maintenance

It is very important to keep right operation and regular maintenance of machine, which will also affect the amount of sand making.

Continuous and uniform feeding can not only ensure normal production, but improve the productivity. If users don’t do regular maintenance, it will cause wearing parts wear faster and greatly reduce equipment life, which all causes low output.

7. Requirements on fineness of finished sand

This is also for a special reason. The greater the fineness requirement (the finer the finished material)is, the smaller the sand production capacity. This is up to what kind of fineness you want.

In conclusion, that sand making machine can't reach the original output is related to the above 7 factors. So when choosing a machine, user needs to consider their own condition. We believe that as long as these factors are followed—choosing right product, correct operation, more inspection and maintenance, which can be effectively improved the sand production.

Six development trends of sand making machine

The competition of sand making machine manufacturers is very fierce, if the existing manufacturers want to stand out in the industry, they need to establish a general view and pay more attention to the development of sand making machine. The development of sand making machine is very rapid, and its future development trends are mainly as follows:

1. Large-scale development

With the increase in the scale of mining enterprises and the demand for sand resources, as well as the improvement of sand production capacity, sand making machines will inevitably develop to scale.

2. Environmental protection

During the work of the sand making machine, because the particle size of material crushing is very small, it will fly out continuously due to inertia factor, resulting in dust, at present, most manufacturers use dust collectors to achieve the effect of dust removal, in the future, the environmental protection of sand making machine can be improved by enhancing the airtightness of sand making machine or using environmental protection materials.

3. Automation

In the future, the sand making machine can stop working by setting vibration and alarm devices to warn when abnormal vibration occurs. Realizing automatic production and testing can protect the safety of sand making machines and operators.

4. Development of mechatronics

People have always attached great importance to the high efficiency and energy saving of sand making machine. The rapid development of science and technology in the future can promote the mechatronics process of sand making equipment. The production efficiency and production capacity of the mechatronics sand-making equipment are greatly improved than before.

5.simplified structure

For the sand making machine, the simplification of the structure can not only effectively reduce the noise, but also simplify the maintenance, overhaul and lubrication. It is also more convenient to use and can greatly exert its own performance.

6. Standardization development

The standardization of sand making machine is convenient for the design and production, and also can reduce the production cost accordingly, which is an important trend of the development of machinery production. Standardized production can provide reference data for later design, save more time for the optimization analysis of sand making machine, and further improve the research on sand making machine.

The development trend of sand making machine is closely related to the manufacturers. The manufacturers should keep up with the pace of market development, continuously research and improve the production of sand making machine, and contribute its due strength to the sand making industry.