Bamak crusher, price of Bamak crusher, manufacturer of Bamak crusher, how much is a Bamak crusher?
Introduction to Bamak Crusher:
Bamak Crusher is a new type of crusher with a certain level of high energy and low consumption developed by our company on the basis of years of research and development of mining engineering machinery and equipment, absorbing the technology of similar products of impact crusher at home and abroad, and ingeniously combining the principles of stone crushing and stone iron crushing. Its performance plays an irreplaceable role in various ore fine crushing equipment.
Good application fields of Bamak crusher:
Bamak crusher is applicable to the crushing and shaping of soft or medium hard and harder materials. It is widely used in various ores, cements, refractories, bauxite clinker, carborundum, glass raw materials, machine-made building sand, stone materials and various metallurgical slags, especially for high hard, good hard and wear-resistant materials such as silicon carbide, carborundum, sintered bauxite, American sand.
Bamak Crusher is an ideal production equipment for machine-made sand, cushion material, asphalt concrete and cement concrete aggregate in the project area.
Bamak crusher is in the good mining area. Bamak crusher is widely used in the pre grinding process. It can produce a large amount of fine ore and reduce the grinding load of high cost.
Because of its excellent low abrasion, the Bamak crusher is also used in the production of high abrasion and secondary disintegration crushing. In addition, because of the zero pollution to the product, the Bamak crusher is well adapted to the production of glass quartz sand and other high-purity materials. With a production capacity of 10-500t/h, the Bamak crusher can meet almost any production requirements.
Working principle of Bamak crusher:
The materials vertically fall into the high-speed rotating impeller from the upper part of the machine. Under the action of high-speed centrifugal force, the materials distributed around the impeller in the form of an umbrella with the other part produce high-speed impact and crushing.
After the materials collide with each other, the materials will form eddy currents between the impeller and the casing for multiple times of mutual impact, friction and crushing. The materials will be discharged directly from the lower part, forming a closed circuit for multiple cycles, It is controlled by screening equipment to reach the required particle size of finished products.