Crack technical problems, mobile crushing station makes construction waste ＂revive＂
My country's urban construction is developing rapidly, but the disposal of a large amount of construction waste and appendages generated in the process of development has not been improved at the same time, which has become a major stubborn problem hindering urban environmental construction. From the root cause, the attention and protection of the environment is far from enough in various places. Many problems in development are not fully aware of the hazards and consequences. Therefore, they focus too much on performance improvement, while ignoring some major urban problems. This year, many provinces and cities have begun to pay attention to the intensity of urban problems, and have also expressed more clearly their attitude towards urban construction waste disposal.
At present, the domestic attention to construction waste is getting higher and higher, and the construction waste treatment market will also quickly become popular. SMMVIK has more than 25 years of experience in crusher production, and has devoted itself to research and development to solve the technical problems of construction waste, so that construction waste will no longer be a problem for the city, turn waste into treasure, and create economic benefits.
The construction waste treatment production line with an output of 200 tons per hour designed and produced by our company
1. Equipped with a special crusher for construction waste, which can crush all kinds of solid waste generated by urban construction and has a wide range of applications.
2. The unique crushing cavity design has a larger crushing ratio for construction waste, and the feeding particle size also expands from small size to large particle size.
3. The vehicle chassis can move freely, and the turning speed is fast, which can realize the replacement of the crushing site at any time, and can drive smoothly in the mountains and flats.
4. On-site installation is convenient, equipment scalability is strong, installation time is short, and investment costs are saved.
5. It is environmentally friendly, including basic dust removal and noise reduction devices, and uses motors that strictly comply with environmental protection standards.
6. The output of 200 tons per hour is more suitable for initial investors, and the medium-sized scale is good for management, investment and operation.
Construction waste mobile crusher
The process flow of the mobile crushing station for construction waste with an hourly output of 200 tons: the construction waste is loaded by the excavator, and the feeder is equipped with feeding, which can pre screen the materials. A part of the fine materials that do not need to be crushed are directly screened out through the castor bar, and the large materials are evenly sent to the crusher through the feeder. After crushing, the construction waste is removed with the help of the iron separator, and then transmitted to the screening station equipment through the belt conveyor, The unloading height of the screening station equipment is about 3 meters. The finished aggregates of 0-5/5-10/10-21.5/21-30mm in four specifications are directly output through four discharge belt conveyors in front of the screen, and the materials greater than 30mm are sent to the crusher again through the return belt conveyor for crushing, forming a closed cycle. The power of the whole machine is about 220kw, and the recycling and utilization rate of construction waste is very considerable.