The output of the sand making machine is unstable? The whole dry goods teach you to improve the efficiency of the sand machine
Construction machinery will be worn during use, and sand making machines are no exception. Regular maintenance of sand making machines can improve the efficiency of sand making machines and ensure normal production and stable output. If you want to flatten the cost of use, extend the service life of the sand machine, and stabilize your sand machine output, take a look at this sand machine maintenance dry goods.
Stable output requires good start-up conditions, which must be centered and evenly fed. Regularly check the lubricating filter for iron filings, check the oil level of the lubricating oil, and check the contamination of the lubricating oil. Consumables must be inspected for wear and the condition of all bolts and their fasteners must be checked. It must be checked that both motors run at the same current. The tension of the triangle belt must also be checked. In addition, it should be noted that after replacing the accessories, the throwing wheel must be dynamically balanced to run the crusher.
During the operation of the sand making machine, because the equipment is a high-speed equipment, special attention should be paid to safe production. Relevant personnel should stay away from the equipment. If the machine needs to be repaired, it should be done after the machine is stopped. The tensioning force of the transmission triangle belt should be adjusted appropriately to ensure that the triangle belt is evenly stressed. When driven by two motors, the triangle belts on both sides should be grouped and matched, so that the length of each group is as consistent as possible. It should be adjusted so that the current difference between the two motors does not exceed 15A, which is also of great significance to the stability of the output.
The sand making machine must do the necessary inspection before and after use, do the above inspection and maintenance points, prevent the failure, ensure the smooth operation of the equipment, and improve the output and the efficiency of the sand machine.