100t/h cobblestone sand making machine

A 100t/h cobblestone sand making machine is a piece of equipment designed to process cobblestones into sand at a rate of 100 tons per hour. This can be achieved using a combination of crushing and screening machines, typically including a jaw crusher, a cone crusher, and a vibrating screen. Here's a general overview of how such a system might be set up:

1. Feeder: A feeder machine, such as a vibrating feeder or a grizzly feeder, is used to evenly feed the cobblestones into the crushing system.

2. Jaw crusher: The cobblestones are then fed into a jaw crusher , which breaks them down into smaller particles. The jaw crusher is often used as a primary crusher, reducing the material to a coarse size.

3. Cone crusher: The coarsely crushed material is then passed on to a cone crusher, which further reduces the particles to a finer size. This step may be repeated using multiple cone crushers, depending on the desired final particle size.

4. Vibrating screen: After the crushing process, a vibrating screen is used to separate the crushed cobblestones into different particle size ranges. The screen can be adjusted to produce the desired sand size.

5. Conveyor belts: Conveyor belts are used to transport the crushed stones and sand between the different processing units.

6. Dust collection and suppression system: A dust collection system, such as a bag filter or cyclone, is used to capture and remove dust generated during the crushing process.

7. Control system: An automated control system can be used to monitor and adjust the operation of the machines, ensuring optimal performance and product quality.

Please note that the exact configuration and size of the machines required for a 100t/h capacity will depend on factors such as the hardness of the cobblestones, the desired sand size, and the specific production requirements. It's important to consult with experienced professionals and equipment manufacturers to ensure that the system is designed and installed correctly.