600 tons per hour gravel sand production line

A 600 tons per hour (tph) gravel sand production line is a high-capacity system designed to process and produce gravel and sand in large quantities. To achieve a throughput of 600 tph, the production line would require a combination of crushing, screening, and conveyor equipment.

Here is a suggested layout for a 600 tph gravel sand production line:

Primary crushing:

Use a large jaw crusher (e.g., NK1250) with a feed opening of 1200 mm x 750 mm. This crusher should be capable of handling large blocks of raw material and processing them into coarse gravel.

Secondary crushing:

Use a cone crusher (e.g., HP500) with a throughput capacity of around 300 tph. This crusher will further reduce the particle size of the coarse gravel.

Tertiary crushing:

Use a VSI crusher (e.g., VSI-5X) with a throughput capacity of around 200 tph. This crusher will fine-tune the particle size and shape of the gravel.

Screening:

Use a large vibrating screen (e.g., YK3245) with a screening area of 3200 mm x 4500 mm. This screen will separate the crushed gravel into different size fractions, including sand.

Sand washing and dewatering:

Include a washing system with water sprays and dust collectors to remove dust and impurities from the crushed gravel and sand.

Use centrifuges or press filters to remove excess moisture from the washed sand.

Drying:

Use a rotary dryer with a capacity of around 300 tph to dry the washed and dewatered sand.

Conveyor system:

Use heavy-duty belt conveyors to transfer the raw materials and products between the crushing and screening stations.

Storage:

Use silos or hoppers to store the crushed gravel and sand.

Please note that the specific equipment required for a 600 tph gravel sand production line will depend on the type of raw material, desired output size, and other factors. This layout is only a suggestion and should be adjusted according to the unique requirements of each project.