How to solve the abnormal swing of the flywheel of the E-type crusher?

The abnormal swing of the flywheel of an E-type crusher can be caused by a variety of factors, such as unbalanced flywheel, loose bolts, worn bearings, or incorrect assembly. To solve this problem, the following steps can be taken:

1. **Check the flywheel balance**: If the flywheel is unbalanced, it can cause vibration and noise during operation. Check the flywheel for any unevenness or cracks, and if necessary, re-balance the flywheel by adding or removing weight.

2. **Check the bolts**: Loose bolts can cause the flywheel to wobble or swing during operation. Check all the bolts connecting the flywheel to the crusher and tighten them if necessary.

3. **Check the bearings**: Worn or damaged bearings can cause the flywheel to swing or vibrate abnormally. Inspect the bearings for any signs of wear or damage, and replace them if necessary.

4. **Check the assembly**: Incorrect assembly of the flywheel can also cause it to swing abnormally. Disassemble the flywheel and check for any incorrect or misaligned parts. Reassemble the flywheel correctly and tighten all the necessary bolts.

5. **Adjust the crusher**: If the flywheel is still swinging abnormally after the above steps, it may be due to incorrect adjustment of the crusher. Consult the crusher manual for instructions on how to adjust the crusher to ensure proper operation.

Regular maintenance and inspection of the E-type crusher can help prevent the flywheel from swinging abnormally and extend the life of the equipment. It is important to follow the manufacturer's instructions and guidelines when performing any maintenance or repairs.