Machine for processing bluestone, bluestone crusher

Bluestone, also known as blue stone, is a type of aggregate material commonly used in landscaping and construction projects. It is typically a mix of crushed stone, sand, and gravel in various proportions. To process bluestone, you can use a combination of crushing and screening equipment.

For processing bluestone, you might consider using the following equipment:

1. Primary crusher: A jaw crusher is suitable for crushing hard and abrasive materials, including bluestone. A popular model for this application might be a PE 750 x 1060 jaw crusher, which has a capacity of around 300-400 tons per hour (tph).

2. Secondary crusher: Depending on the desired output size, a cone crusher or impact crusher can be used as a secondary crusher to further process the material. For example, a HP 200 cone crusher or a VI 700 impact crusher could be suitable. These crushers have capacities ranging from 100-300 tph, depending on the specific model and configuration.

3. Screening equipment: After the primary and secondary crushing stages, screens are used to separate the crushed material into different particle sizes. You might need several screens with different mesh sizes, such as a 10-30 mm screen and a 30-60 mm screen. The required screening capacity will depend on the desired output size and production rate.

4. Sand washing equipment: If your bluestone mix includes sand, you may need a sand washing machine to remove any impurities and improve the quality of the sand.

5. Mixing equipment: To create the desired bluestone mix, you'll need a mixing plant that can accurately proportion and blend the crushed stone, sand, and gravel.

Please note that these are general recommendations, and the specific equipment chosen for your project should be based on your material properties, desired output size, and production capacity requirements. It's important to consult with a professional manufacturer or supplier to ensure that you choose the most suitable equipment for your needs.