What to do if the amplitude of the sand making machine increases?
If the amplitude of the sand making machine increases, it could be an indication of a problem that needs to be addressed to ensure the machine continues to operate efficiently and safely. Here are some steps to take if you notice that the amplitude of your sand making machine has increased:
1. **Inspect the machine:**
- Carefully inspect the machine for any signs of damage, such as cracked or broken parts, loose connections, or leaks.
- Pay particular attention to the parts that are responsible for controlling the amplitude, such as the eccentric shaft, bearings, and drive system.
2. **Check the lubrication:**
- Ensure that the machine is properly lubricated, as insufficient lubrication can cause increased vibration and amplitude.
- Check the oil level and quality, and replace the oil if necessary.
3. **Adjust the machine settings:**
- Consult the operator's manual to determine if there are any adjustments that can be made to reduce the amplitude.
- Adjust the machine settings, such as the speed of the rotor or the gap between the impact plates, as recommended by the manufacturer.
4. **Check the feed rate:**
- Ensure that the feed rate of the raw material into the machine is within the recommended range.
- A feed rate that is too high can cause the machine to overload, leading to increased amplitude and vibration.
5. **Inspect the drive system:**
- Check the drive system, including the motor, belt, and pulleys, for any signs of wear or damage.
- Ensure that the drive system is properly tensioned and aligned.
6. **Consult the manufacturer:**
- If the amplitude continues to be a problem after trying the above steps, consult the manufacturer or a qualified technician for further assistance.
- They may be able to provide more specific guidance or recommend repairs or replacements if necessary.
It's important to address increased amplitude promptly to avoid potential damage to the machine and to ensure continued efficient operation. Regular maintenance and inspection of the machine can help prevent many issues that can lead to increased amplitude.